DESCRIPTION = "PUMOTIX_milling(*.TAP)"
;
FILE_EXTENSION = "TAP"
;
UNITS = MM
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = "[13][10]"
;
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.0]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.4]
FORMAT = [Y|#|Y|1.4]
FORMAT = [Z|#|Z|1.4]
; Home tool positions 
FORMAT = [XH|@|X|1.4]
FORMAT = [YH|@|Y|1.4]
FORMAT = [ZH|@|Z|1.4]
;
; Set up program header
;
START = "([FILENAME])"
START = "(Post processor ArtCam: PUMOTIX_milling)"
START = "(Material Size) (X=[XSIZE], Y=[YSIZE], Z=[ZMATERIAL])"
START = "G21 G49 G80 G90 G91.1"
START = "G0[ZH]"
START = "(Tool Number:[T]) ([TOOLDESC])"
START = "M6T[T]"
START = "G43"
START = "M3 [S]"

;
; Program moves
;
FIRST_RAPID_RATE_MOVE  = "G0 [X] [Y] [Z]"
;
FIRST_FEED_RATE_MOVE   = "G1 [X] [Y] [Z] [F]"
FEED_RATE_MOVE         = "[X] [Y] [Z]"
;

NEW_SEGMENT_POST_TOOLCHANGE= "M3 [S]"

;
;
; End of file
;
END = "G0[ZH]"
END = "G0[XH][YH]"
END = "M5"
END = "M30"
; M30 = program end and rewind
;
; Tool Change
;
;
TOOLCHANGE = "(Tool Number:[T]) ([TOOLDESC])"
TOOLCHANGE = "M6 T[T]"
TOOLCHANGE = "G43"