Перейти к содержимому

3.2.4 en.html

Версия 5.1 от nosolodkov на 2019/10/24 17:06

Client application version: 3.2.19297.11166. Server verion 3.2.4.

  1. Modbus RTU support added. Spindle control via Modbus using background operations is now available.
  2. Axis calibration wizard added. Now you can calibrate the 'Steps per Unit' value without performing mathematical calculations of gear ratios.
  3. New 5-axis milling module added.
  4. Pendant support plugin: stability improved.
  5. Option 'Auto Spindle turn of on Stop' added to spindle settings.
  6. The text fields for 'Feed Rate Override', 'Rapid Rate Override' and 'Spindle Override' blocks are unlocked for user input.
  7. 1366х768 display resolution support improved.
  8. 'Steps per Unit' axis parameter is updated: added support for 6 decimal places.
  9. Total G-code execution time is displayed taking into consideration feedrate and rapidrate override values.
  10. M30 command sets G-code parameters which are specified in interpreter initialization string (Settings -> G-code).
  11. Macros and background operations API was extended.
  12. Plasma module: warning added that auto-voltage is used with zero regulation delay.
  13. Plasma module: warning added that hardware ArcOK can not be used with set zero arc transfer time.
  14. Oxy-Fuel module: cutting torch can be turned on and turned off during jog moves (using hotkey).
  15. G-Code tab updated (cutter radius compensation unit was refactored).
  16. Some other improvments and fixes in user interface were made.