Исходный код вики 3.3.0 en.html
Версия 4.2 от nosolodkov на 2022/06/10 13:18
Последние авторы
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% style="color: rgb(0,51,102);" %)Client: build **v. 3.3.0.20031** | ||
| 2 | |||
| 3 | (% style="color: rgb(0,51,102);" %)Server: build **v. 3.3.0** | ||
| 4 | |||
| 5 | (% style="color: rgb(0,51,102);" %)1. Analog inputs added (hardware support presents for PLCM-E3 in current device generation). | ||
| 6 | 2. Dynamic motors bound to axis disabling/enabling implemented. | ||
| 7 | 3. Possibility to deskew gantry axes added. It is possible to set program shift of the home sensor for selected motor. | ||
| 8 | 4. Wizard implemented that allows to check gantry axes alignment. Sequential move to four positions forming rectangle is performed on run. Execution is stopped at every position what allows to make a mark on the sheet. When wizard's execution is finished it is necessary to measure two rectangle's diagonals and enter actual values. Wizard calculates a shift of the home sensor and show recommended setting. | ||
| 9 | 5. Softlimits can be separately enabled/disabled. | ||
| 10 | 6. Posibility to mark axes as homed added. | ||
| 11 | 7. It is posible to set a delay between STEP pulse and DIR switching. Parameter's value may depend on the model of driver used. | ||
| 12 | 8. Move to machine zero executed for homed axes only. This command's logic can be edited by modifying M118 macro. | ||
| 13 | 9. Added message that several devices with identical IP are discovered in the network. | ||
| 14 | 10. Macros and background operations API was extended. | ||
| 15 | ~11. SwapToolSlots function added to macros API that allows to implement toolchange algorithm when double-arm toolchanger is used. | ||
| 16 | 12. Some messages for default macros localized. | ||
| 17 | 13. CPU load reduced in some cases during G-code execution. | ||
| 18 | 14. Smooth stopping when Stop button pressed during homing implemented. | ||
| 19 | 15. Delays are decreased for Modbus connections with certain speeds. | ||
| 20 | 16. Fixed an issue when the COM port wasn't changed in the Modbus master window. | ||
| 21 | 17. Diagnostics tab visually refactored for all modules. | ||
| 22 | 18. Minor bug fixes and improvements.** | ||
| 23 | ** | ||
| 24 | |||
| 25 | (% style="color: rgb(0,51,102);" %)[[Full release notes ...>>url:http://doc.pumotix.ru/pages/viewpage.action?pageId=5180884||style="text-decoration: none;" shape="rect"]] |