Изменения документа 3.3.2 en.html

Сводка

• Свойства страницы (3 изменено, 0 добавлено, 0 удалено)

Подробности

Свойства страницы

Родительский документ

...	...	@@ -1,0 +1,1 @@
	1	+WebHome

Автор документа

...	...	@@ -1,1 +1,1 @@
1		-XWiki.nosolodkov
	1	+XWiki.Knetyaga

Содержимое

...	...	@@ -1,10 +1,7 @@
1		-Client: build **v. 3.3.2.20102**
2		-
3		-Server: build **v. 3.3.2**
4		-
5		-1. New feature **Automatic zoned down draft air table control** added.
6		-1. (% style="color: rgb(23,43,77);" %)Support of **hardware Start button** added. There is a **configurable delay for filtering false positives**.
	1	+1. New feature **[[Automatic zoned down draft air table control>>doc:Руководство пользователя.Описание опций.Автоматическое управление вытяжным столом.WebHome]]** added for plasma cutting module.
	2	+1. (% style="color:#172b4d" %)Support of **hardware Start button** added. There is a **configurable delay for filtering false positives**.
7	7	1. New input signal for the motor added - **Limit Middle**. It is recommended for the border sensor of two working areas of the machine. E.g. a table area and a separate rotary axis area. When this sensor is triggered, the system will switch to EStop mode with a corresponding message. Jogging away for this sensor is allowed in both directions.
	4	+1. **The accuracy and speed of G-code processing are increased** due to optimization of interpolation algorithms.
8	8	1. Added a **global option Execute the interpreter initialization string on M30** command. By default this option is enabled for the preservation of the system behavior as in previous versions. Checking this option can be useful, for example, if you want to save the last selected coordinate system G54-G59 after completing the g-code execution.
9	9	1. The set of standard probing settings for milling modules has been expanded, namely, the **Probe tip diameter** has been added. Parameter is recommended to specify the diameter of the ball mounted on the tip of the stylus of the probe sensor.
10	10	1. New operation mode for plasma cutting module added: **THC with external Z axis control**. This mode is recommended for correct interaction with fully **autonomous torch height controllers**.
...	...	@@ -19,5 +19,6 @@
19	19	1. Fixed a bug related to the stop command when the axis is referenced.
20	20	1. The plasma cutting module now displays only the process parameters that relate to the selected THC mode: Ethernet THC device, UP/DOWN, manual THC, or External Z axis.
21	21	1. Message "Device: Unexpected Arc OK fail" is now displayed in the notification area.
	19	+1. Added a message with the name of the axis that goes beyond the soft limits.
22	22
23		-[[Full release notes ...>>doc:История обновлений]]
	21	+[[Full release notes ...>>doc:Руководство пользователя.История обновлений.WebHome]]