Исходный код вики 3.3.2 en.html
Версия 3.1 от nosolodkov на 2020/05/13 12:37
Последние авторы
| author | version | line-number | content |
|---|---|---|---|
| 1 | Client: build **v. 3.3.2.20102** | ||
| 2 | |||
| 3 | Server: build **v. 3.3.2** | ||
| 4 | |||
| 5 | 1. New feature "Automatic zoned down draft air table control" added. | ||
| 6 | 1. (% style="color: rgb(23,43,77);" %)Support of hardware Start button added. There is a configurable delay for filtering false positives. | ||
| 7 | 1. New input signal for the motor added - Limit Middle. It is recommended for the border sensor of two working areas of the machine. E.g. a table area and a separate rotary axis area. When this sensor is triggered, the system will switch to EStop mode with a corresponding message. Jogging away for this sensor is allowed in both directions. | ||
| 8 | 1. New operation mode for plasma cutting module added: THC with external Z axis control. This mode is recommended for correct interaction with fully Autonomous torch height controllers. | ||
| 9 | 1. Filtering of the IO signals on the diagnostics tab added. Now only the signals that are applicable to this module are displayed. | ||
| 10 | 1. Fixed issue when the main window faded into the background when the child window closed. | ||
| 11 | 1. When referencing, tracking of end limit sensors is enabled after moving to the "move avay distance". This avoids false triggering limit switches. | ||
| 12 | 1. Fixed rare issue when the THC correction displays an incorrect value. | ||
| 13 | 1. Simulator features updated. | ||
| 14 | 1. The tooltip for the tray icon displays the current server name. | ||
| 15 | 1. LED bar at "Plasma cutting module" refactored: state of Automatic zoned down draft air table added (ready/not ready). | ||
| 16 | 1. "Apply license" button is available now at Idle machine state. Attention, before the applying of the license file, the machine will be turned off automatically. | ||
| 17 | 1. Fixed a bug related to the stop command when the axis is referenced. | ||
| 18 | 1. The plasma cutting module now displays only the process parameters that relate to the selected THC mode: Ethernet THC device, UP/DOWN, manual THC, or External Z axis. | ||
| 19 | 1. Message "Device: Unexpected Arc OK fail" is now displayed in the notification area. | ||
| 20 | |||
| 21 | [[Full release notes ...>>doc:История обновлений]] |