3.3.2 en.html
Версия 3.1 от nosolodkov на 2020/05/13 12:37
Client: build v. 3.3.2.20102
Server: build v. 3.3.2
- New feature "Automatic zoned down draft air table control" added.
- Support of hardware Start button added. There is a configurable delay for filtering false positives.
- New input signal for the motor added - Limit Middle. It is recommended for the border sensor of two working areas of the machine. E.g. a table area and a separate rotary axis area. When this sensor is triggered, the system will switch to EStop mode with a corresponding message. Jogging away for this sensor is allowed in both directions.
- New operation mode for plasma cutting module added: THC with external Z axis control. This mode is recommended for correct interaction with fully Autonomous torch height controllers.
- Filtering of the IO signals on the diagnostics tab added. Now only the signals that are applicable to this module are displayed.
- Fixed issue when the main window faded into the background when the child window closed.
- When referencing, tracking of end limit sensors is enabled after moving to the "move avay distance". This avoids false triggering limit switches.
- Fixed rare issue when the THC correction displays an incorrect value.
- Simulator features updated.
- The tooltip for the tray icon displays the current server name.
- LED bar at "Plasma cutting module" refactored: state of Automatic zoned down draft air table added (ready/not ready).
- "Apply license" button is available now at Idle machine state. Attention, before the applying of the license file, the machine will be turned off automatically.
- Fixed a bug related to the stop command when the axis is referenced.
- The plasma cutting module now displays only the process parameters that relate to the selected THC mode: Ethernet THC device, UP/DOWN, manual THC, or External Z axis.
- Message "Device: Unexpected Arc OK fail" is now displayed in the notification area.