Перейти к содержимому

Изменения документа 3.4.0 en.html

Редактировал(а) writer 2022/06/17 13:56
От версии 2.1
отредактировано knetyaga
на 2020/07/27 09:25
Изменить комментарий: К данной версии нет комментариев
К версии 5.1
отредактировано nosolodkov
на 2020/08/12 08:47
Изменить комментарий: К данной версии нет комментариев

Сводка

Подробности

Свойства страницы
Автор документа
... ... @@ -1,1 +1,1 @@
1 -XWiki.knetyaga
1 +XWiki.nosolodkov
Содержимое
... ... @@ -1,1 +1,21 @@
1 +1. Support for the new motion controller [[PX1>>url:http://pumotix.com/#controllers||style="text-decoration: none;" rel="nofollow" shape="rect" class="external-link"]] added.
2 +1. Setup menu for the [[PLL-R2>>url:http://pumotix.com/#controllers||style="text-decoration: none;" rel="nofollow" shape="rect" class="external-link"]] ohmic sensor added. Now you don't need to install alternative versions of macros M3, M4, M100 and M102.
3 +1. Interpolation algorithms were significantly optimized what allowed to substantially increase G-code processing accuracy with maintaining high processing speed.
4 +1. Network communication with device was optimized to additionally improve connection stability.
5 +1. New signal added: TorchDetachment. The input signal to handle the collision for plasma or oxy-fuel cutters. When the input is triggered, the program automatically stops running.
6 +1. New signal added: SpindleActive. Discrete input, which is recommended to monitor the real state of the spindle: running or not? It can be used for simple feedback with the spindle. Allows you to prevent the program from running when the spindle is disabled.
7 +1. New signal added: OmichSensorEnable. Output for switching on/off the ohmic sensor measuring circuit. It is activated when probing only.
8 +1. New signal added: SpindleCoolant. Output for controlling the spindle cooling pump.
9 +1. New signal added: SpindlePurge. The output of purging the spindle bearings with air (locking air).
10 +1. IO signal control without binding pin of motion controller is available. This allows you to link PUMOTIX IO signals to external modules IO modules via Modbus and Background operations.
11 +1. Mode G43/G49 added to G-Code modal groups line.
12 +1. Incorrect behavior when applying tool length compensation with the G43 command immediately after making changes to the tool table fixed.
13 +1. Added the ability to change the color theme without restarting the program.
14 +1. Plasma: fixed bug with THC during jogging.
15 +1. Plasma cutting module: the mechanism for dynamically displaying the configured axes on the main screen is improved. Controls are displayed only for axes that have at least one mapped motor.
16 +1. The number of user outputs has been expanded to 20.
17 +1. The number of user inputs has been expanded to 20.
18 +1. Dynamically change color themes without restarting software added.
19 +1. Other improvements.
20 +
1 1  [[Full release notes ...>>doc:История обновлений]]