Исходный код вики 3.4.0 en.html
Версия 3.1 от abolgov на 2020/08/11 16:56
Последние авторы
| author | version | line-number | content |
|---|---|---|---|
| 1 | ~1. Support for the new motion controller PX1 added. | ||
| 2 | 2. Interpolation algorithms were significantly optimized what allowed to substantially increase G-code processing accuracy with maintaining high processing speed. | ||
| 3 | 3. Network communication with device was optimized to additionally improve connection stability. | ||
| 4 | 4. New signal added: TorchDetachment. The input signal to handle the collision for plasma or oxy-fuel cutters. When the input is triggered, the program automatically stops running. | ||
| 5 | 5. New signal added: SpindleActive. Discrete input, which is recommended to monitor the real state of the spindle: running or not? It can be used for simple feedback with the spindle. Allows you to prevent the program from running when the spindle is disabled. | ||
| 6 | 6. New signal added: OmichSensorEnable. Output for switching on/off the ohmic sensor measuring circuit. It is activated when probing only. | ||
| 7 | 7. New signal added: SpindleCoolant. Output for controlling the spindle cooling pump. | ||
| 8 | 8. New signal added: SpindlePurge. The output of purging the spindle bearings with air (locking air). | ||
| 9 | 9. IO signal control without binding pin of motion controller is available. This allows you to link PUMOTIX IO signals to external modules IO modules via Modbus and Background operations. | ||
| 10 | 10. Mode G43/G49 added to G-Code modal groups line. | ||
| 11 | ~11. Incorrect behavior when applying tool length compensation with the G43 command immediately after making changes to the tool table fixed. | ||
| 12 | 12. Added the ability to change the color theme without restarting the program. | ||
| 13 | 13. Plasma: fixed bug with THC during jogging. | ||
| 14 | 14. Plasma cutting module: the mechanism for dynamically displaying the configured axes on the main screen is improved. Controls are displayed only for axes that have at least one mapped motor. | ||
| 15 | 15. The number of user outputs has been expanded to 20. | ||
| 16 | 16. The number of user inputs has been expanded to 20. | ||
| 17 | 17. Other improvements. | ||
| 18 | |||
| 19 | [[Full release notes ...>>doc:История обновлений]] |