Skip to Content
Last modified by writer on 2022/08/26 15:26
Show last authors
1 The PUMOTIX software with the “Oxy-fuel cutting (4 axis)” module is designed for comprehensive control of the operation of the portal oxy-fuel metal cutting machine with CNC. This module allows you to:
2
3 * control the process of oxy-fuel metal cutting by visual inspection and diagnostics of the cutting process;
4 * control the process of metal processing on the monitor screen, scale the image of the card of figured cutting;
5 * carry out metal cutting in manual mode, moving over the material with the keys of manual moves with a lit cutting torch;
6 * control the torch height above the metal in various modes of the system: autonomous Z axis, UP/DOWN control, manual Z height correction;
7 * perform automatic search of the surface of the material (Probing) before ignition;
8 * start G-Code execution from any point of the contour (including from the middle of the frame) with automatic switching on of ignition, heating and purge oxygen before the start of movement;
9 * set cutting parameters in the PUMOTIX program interface with the possibility of their adjustment on the fly during contour cutting;
10 * quickly create, edit, save, delete sets of parameters of the oxy-fuel cutting process, configured for a specific type of metal and thickness;
11 * debug the machine and monitor control signals using the Diagnostics tab.
12
13 Possible modes of operation of the module:
14
15 * work with external autonomous controllers of the torch height of the oxy-fuel torch (CHC-400, etc.);
16 * control of torch height over metal according to UP/DOWN protocol;
17 * Z height adjustment in manual mode (using buttons from the PUMOTIX program).
18
19 Coordinate axis control: X, Y, Z, A. The number of supported motors is limited by the capabilities of the PLCM controller (for PLCM-E1b/E1b OEM, PLCM-E3/E3p and PLCM-E4 - 6 motors).
20
21 For detailed system information, refer to the following sections:
22
23 {{documentTree root="document:xwiki:Руководство пользователя.Модуль газокислородной резки.WebHome" compact="true" showAttachments="false" showTranslations="false"/}}