Last modified by writer on 2024/09/25 14:21

From version 2.1
edited by writer
on 2024/09/24 14:01
Change comment: There is no comment for this version
To version 1.2
edited by writer
on 2024/09/24 12:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,58 +2,57 @@
2 2  **This page didn't translate yet. You can see the original page.**
3 3  {{/info}}
4 4  
5 -The PUMOTIX feature allows you to configure one or more motors to control the rollgang.
5 +Новая опция PUMOTIX позволяет настроить один или несколько двигателей под управление приводным рольгангом.
6 6  
7 -Make sure that you have access to a license to control the rollgang before setting up. You can check the availability of a license for a feature in the menu "Configuration" → "License Manager". Expand the "General Features" node in the PUMOTIX features tree. You can use the trial period if the "Controlled rollgang support" feature is not activated.
7 +Перед настройкой убедитесь, что Вам доступна лицензия на управление приводным рольгангом. Проверить наличие лицензии на опцию можно в меню "Configuration" → "License Manager". В дереве опций PUMOTIX разверните узел "General Features". Если опция "Controlled rollgang support" не активирована, можете воспользоваться пробным периодом.
8 8  
9 9  [[Activation of the trial period of the "Controlled rollgang support" feature>>image:image2020-8-26_9-2-47.png||data-xwiki-image-style-alignment="center" height="500" width="694"]]
10 10  
11 -As an example, consider the setup of a pipe cutting machine with a rollgang, working in tandem with a rotary axis B.
11 +В качестве примера рассмотрим настройку станка для резки труб с приводным рольгангом, работающего в паре с поворотной осью B.
12 12  
13 -{{success title="**Selecting the symbolic name of the rotary axis A or B**"}}
14 -If the pipe cutter axis is oriented along the X axis of the machine, then it is recommended to link the rotary axis and rollgang motors to the rotary axis A.
15 -If the pipe cutter axis is oriented along the X axis of the machine, then it is recommended to link the rotary axis and rollgang motors to the rotary axis B.
13 +{{success title="**Выбор символьного названия поворотной оси A или B**"}}
14 +Если ось трубореза ориентирована вдоль оси X станка, то двигатели поворотной оси и рольгангарекомендуется привязать к поворотной оси A.
15 +Если ось трубореза ориентирована вдоль оси Y станка, то двигатели поворотной оси и рольгангарекомендуется привязать к поворотной оси B.
16 16  {{/success}}
17 17  
18 -Go to the menu item "Configuration" → "Settings" → "Motors" to start configuring.
18 +Чтобы начать настройку, перейдите в пункт меню "Конфигурация" → "Настройки" → "Двигатели".
19 19  
20 -The following figure shows an example of setting up motors for a pipe cutter mounted along the Y axis of the machine. The pipe cutter is controlled by two independent motors: one rotates the chuck, the other rotates the rollgang.
20 +На следующем рисунке показан пример настройки двигателей для трубореза, установленного вдоль оси Y станка. Труборез управляется двумя независимыми двигателями: один вращает патрон, другой - приводной рольганг.
21 21  
22 -{{warning title="**Two motors tied to one axis**"}}
23 -Please note that the rotary axis chuck motor and the rollgang motor are tied to the same rotary axis B.
22 +{{warning title="**Два двигателя привязаны к одной оси**"}}
23 +Обратите внимание, что двигатель патрона поворотной оси и двигатель приводного рольганга привязаны кодной поворотной оси B.
24 24  {{/warning}}
25 25  
26 -For the convenience of further configuration, we will rename the rotary axis motors to “Chuck” and “Rollgang”.
26 +Для удобства дальнейшей настройки мы переименуем двигатели поворотной оси на "Патрон" и "Рольганг".
27 27  
28 -[[Motors Settings>>image:image2020-8-26_7-52-11.png||data-xwiki-image-style-alignment="center" height="548" width="1000"]]
28 +[[Настройки двигателей>>image:image2020-8-26_7-52-11.png||data-xwiki-image-style-alignment="center" height="548" width="1000"]]
29 29  
30 -You need to go to the “Axes” settings tab after setting up the motors. Select the rotary axis from the drop-down list at the top of the window. In this example we use the B axis.
30 +После настройки двигателей необходимо перейти на вкладку настроек "Оси". Из выпадающего списка в верхней части окна выберите поворотную ось. В данном примере мы используем ось B.
31 31  
32 -Make sure that basic axis parameters, such as movement parameters, are configured.
32 +Убедитесь, что настроены основные параметры оси, такие как параметры перемещений.
33 33  
34 -{{success title="**Setting the parameter ~"SPU~" for an axis**"}}
35 -you need to configure the acceleration, speed and count of STEP signals in the "Axis Motion Parameters" block.
36 -The "SPU" parameter in this block must be calculated in such a way that when the G0 B360 command is issued, the rotary axis chuck makes exactly one revolution. The rollgang rotation will be calibrated in the following steps.
34 +{{success title="**Настройка параметра ~"Количество сигналов STEP~" для оси**"}}
35 +В блоке "Параметры перемещений" необходимо настроить ускорение, скорость и количество сигналов STEP.
36 +Параметр "Количество сигналов STEP" в данном блоке должен быть рассчитан таким образом, чтобы при подаче команды G0 B360 патрон поворотной оси делал ровно один оборот. Вращение рольганга будет откалибровано на следующих этапах.
37 37  {{/success}}
38 38  
39 -Let's move on to setting advanced motor parameters for the rollgang when the basic characteristics of the axis have been configured. To do this, in the right part of the axes settings window, turn to the “Additional features” block.
39 +Когда основные характеристики оси были настроены, перейдем к заданию расширенных параметров двигателя для рольганга. Для этого в правой части окна настроек осей обратимся к блоку "Дополнительные возможности".
40 40  
41 -From the drop-down list you must select the motor that is connected to the rollgang.
41 +Из выпадающего списка необходимо выбрать двигатель, который подключен к рольгангу.
42 42  
43 -Check the "Motor as  Rollgang" option to "tell" the system that this motor is part of the rollgang.
43 +Установите отметку на опции "Приводной рольганг" чтобы "сказать" системе, что этот двигатель находится в составе рольганга.
44 44  
45 -The basic idea of ​​automatic rollgang control in PUMOTIX is the following points:
45 +Основная идея автоматического управления приводным рольгангом в PUMOTIX заключается в следующих пунктах:
46 46  
47 -1. There is only one rotary axis (A or B), but there can be several motors attached to the rotary axis (for example, a chuck and a rollgang).
48 -1. The speed F and moving distance (for example, G0 B720) are set for the rotary axis, not for the rollgang motor.
49 -1. The rollgang rotation speed should be calculated automatically based on three parameters:
50 -11. rollgang roller diameter;
51 -11. count of STEP pulses to rotate the roller by 1 degree;
52 -11. diameter of the pipe installed on the rollgang.
47 +1. Поворотная ось (A или B) одна, а двигателей, привязанных к поворотной оси может быть несколько (например, патрон и приводной рольганг).
48 +1. Скорость F и расстояние перемещения (например, G0 B720) задается для поворотной оси, а не для двигателя рольганга.
49 +1. Скорость вращения рольганга должна рассчитываться автоматически исходя из трех параметров:
50 +11. диаметра ролика рольганга;
51 +11. количества импульсов STEP для поворота ролика на 1 градус;
52 +11. диаметра трубы, установленной на рольганг.
53 53  
54 -{{info title="**The basic operating principle of a rotary axis with a rollgang**"}}
55 -The rotation speed of the rollgang rollers should automatically change when changing the diameter of the pipe installed on the rollgang. In this case, the rotation speed of the rotary axis chuck remains unchanged.
56 -The larger the diameter of the pipe, the greater the rotation speed of the rollgang rollers and vice versa.
54 +{{info title="**Основной принцип работы поворотной оси с приводным рольгангом**"}}
55 +При изменении диаметра трубы, установленного на рольганг, автоматически должна изменяться скорость вращения роликов рольганга. При этом скорость вращения патрона поворотной оси остается неизменной. Чем больше диаметр трубы, тем больше скорость вращения роликов рольганга и наоборот.
57 57  {{/info}}
58 58  
59 59  Для того, чтобы система могла автоматически рассчитать поправочный коэффициент для связи диаметра трубы со скоростью вращения роликов, необходимо внести в настройки системы следующие данные: