Wiki source code of Газовая резка (фоновые операции)
Last modified by writer on 2023/09/08 19:05
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
4.2 | 1 | ===== bool Is_Oxy_Mode () ===== |
| |
1.1 | 2 | |
| |
4.2 | 3 | Checks if PUMOTIX is in gas cutting mode. |
| |
1.1 | 4 | |
| |
4.2 | 5 | Return value: |
| |
1.1 | 6 | |
| |
4.2 | 7 | * true - if PUMOTIX is in gas cutting mode; |
| 8 | * false - if another mode is active. | ||
| |
1.1 | 9 | |
| |
4.2 | 10 | ===== bool GetOxyCuttingOn () ===== |
| |
1.1 | 11 | |
| |
4.2 | 12 | Allows you to check if the oxy cutter is on in oxyfuel mode. |
| |
1.1 | 13 | |
| |
4.2 | 14 | Return value: |
| |
1.1 | 15 | |
| |
4.2 | 16 | * true – if the oxy cutter is on in oxyfuel mode. |
| |
1.1 | 17 | |
| |
4.2 | 18 | ===== bool GetOxyPreheatOn () ===== |
| |
1.1 | 19 | |
| |
4.2 | 20 | Allows you to check if preheat is enabled in oxyfuel mode. |
| |
1.1 | 21 | |
| |
4.2 | 22 | Return value: |
| |
1.1 | 23 | |
| |
4.2 | 24 | * true – if preheat is on in oxyfuel mode. |