Wiki source code of Управление шпинделем (фоновые операции)
Last modified by writer on 2023/09/08 19:07
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
5.2 | 1 | ===== number GetCurSpindleRPM () ===== |
| |
1.1 | 2 | |
| |
5.2 | 3 | Getting the current spindle speed. |
| |
1.1 | 4 | |
| |
5.2 | 5 | Return value: |
| |
1.1 | 6 | |
| |
5.2 | 7 | * current spindle speed, rpm. |
| |
1.1 | 8 | |
| |
5.2 | 9 | ===== number GetGCodeSpindleRPM () ===== |
| |
1.1 | 10 | |
| |
5.2 | 11 | Getting the current spindle speed specified in the G-code. |
| |
1.1 | 12 | |
| |
5.2 | 13 | Return value: |
| |
1.1 | 14 | |
| |
5.2 | 15 | * current spindle speed specified in the G-code, rpm. |
| |
1.1 | 16 | |
| |
5.2 | 17 | ===== number GetSpindleSpeedOverridePercent () ===== |
| |
1.1 | 18 | |
| |
5.2 | 19 | Obtaining a percentage of overriding the current spindle speed. |
| |
1.1 | 20 | |
| |
5.2 | 21 | Return value: |
| |
1.1 | 22 | |
| |
5.2 | 23 | * the percentage that the actual spindle speed is from the specified. |
| |
1.1 | 24 | |
| |
5.2 | 25 | ===== void SetSpindleSpeedOverridePercent (number value) ===== |
| |
1.1 | 26 | |
| |
5.2 | 27 | Specifies the percentage of overriding the current spindle speed. |
| |
1.1 | 28 | |
| |
5.2 | 29 | Options: |
| |
1.1 | 30 | |
| |
5.2 | 31 | * number value - the desired percentage of overriding the current spindle speed. |