Skip to Content
Last modified by writer on 2023/09/08 19:07
Show last authors
1 ===== number GetCurSpindleRPM () =====
2
3 Getting the current spindle speed.
4
5 Return value:
6
7 * current spindle speed, rpm.
8
9 ===== number GetGCodeSpindleRPM () =====
10
11 Getting the current spindle speed specified in the G-code.
12
13 Return value:
14
15 * current spindle speed specified in the G-code, rpm.
16
17 ===== number GetSpindleSpeedOverridePercent () =====
18
19 Obtaining a percentage of overriding the current spindle speed.
20
21 Return value:
22
23 * the percentage that the actual spindle speed is from the specified.
24
25 ===== void SetSpindleSpeedOverridePercent (number value) =====
26
27 Specifies the percentage of overriding the current spindle speed.
28
29 Options:
30
31 * number value - the desired percentage of overriding the current spindle speed.