Skip to Content
Last modified by writer on 2022/11/02 18:40
Show last authors
1 (% style="color:#a0be2d" %)**//G80//**(%%) – command cancel canned cycles.
2
3 The (% style="color:#a0be2d" %)//**G80**//(%%) command is included in modal group 1, so specifying any other command from modal group 1 also cancels the canned cycle.
4
5 {{error title="**it is an error if:**"}}
6 * axis parameters are specified with the (% style="color:#a0be2d" %)//**G80**//(%%) command.
7 {{/error}}
8
9 {{code language="g-code" title="(% style=~"color:#a0be2d~" %)//**G80**//(%%)// example~~://"}}
10 G90 G81 X1 Y1 Z1.5 R2.8 (canned cycle)
11 G80 (cancellation of a canned cycle)
12 G0 X0 Y0 Z0 (fast moving to the origin)
13 {{/code}}
14
15 The following code produces the same result as the previous one.
16
17 {{code language="g-code" title="(% style=~"color:#a0be2d~" %)//**G0**//(%%)//** **example~~://"}}
18 G90 G81 X1 Y1 Z1.5 R2.8 (canned cycle)
19 G0 X0 Y0 Z0 (fast moving to the origin)
20 {{/code}}
21
22 The advantage of the first option is that the (% style="color:#a0be2d" %)//**G80**//(%%) command explicitly disables the [[(% style="color:#a0be2d" %)//**G81**//>>doc:.G81\: Цикл сверления.WebHome]](%%) canned cycle. In this case, it is necessary to enable the displacement mode on the next line with the [[(% style="color:#a0be2d" %)//**G0**//>>doc:Руководство пользователя.Описание G-кодов.Список G-кодов, поддерживаемых системой.G0-G10.G0: Ускоренное линейное перемещение]](%%) command or another displacement mode selection command.
23
24 If the canned cycle has not been disabled by the (% style="color:#a0be2d" %)//**G80**//(%%) command or another command, the canned cycle will be repeated using the following code block containing the parameters X, Y or Z.