Skip to Content
Last modified by writer on 2023/09/01 17:40
Show last authors
1 (% style="color: rgb(160,190,45);" %)
2 //**G82 (X- Y- Z-) or (U- V- W-) R- L- P-**//
3
4 The (% style="color:#a0be2d" %)//**G82**//(%%) cycle is intended for drilling with a dwell at the bottom of the hole. The motion of a (% style="color:#a0be2d" %)//**G82**//(%%) canned cycle looks just like (% style="color:#a0be2d" %)//**G81**//(%%) with the addition of a dwell at the bottom of the Z move. The length of the dwell is specified by a​​​​​​​ (% style="color:#a0be2d" %)//**P-**//(%%) word in the (% style="color:#a0be2d" %)//**G82**//(%%) block.
5
6 The cycle includes the following actions:
7
8 1. Preliminary movement described in the section [[«Canned Cycles»>>doc:Руководство пользователя.Описание G-кодов.Список G-кодов, поддерживаемых системой.G80-G89\: Постоянные циклы.WebHome]].
9 1. Move the Z axis with the current feedrate to Z position.
10 1. Dwell for the P number of seconds.
11 1. The Z-axis does a rapid move to clear Z.