Wiki source code of G85: Цикл растачивания с отводом на рабочей подаче
Last modified by writer on 2022/11/02 19:20
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% style="color: rgb(160,190,45);" %) | ||
| 2 | //**G85 (X- Y- Z-) or (U- V- W-) R- L-**// | ||
| 3 | |||
| 4 | The (% style="color:#a0be2d" %)//**G85**//(%%) cycle is designed for boring, but can also be used for drilling or milling. | ||
| 5 | |||
| 6 | The cycle includes the following actions: | ||
| 7 | |||
| 8 | 1. Preparatory movement described in the section [["Canned cycles">>doc:WebHome]]. | ||
| 9 | 1. Movement along the Z axis with a given feed rate to the Z position. | ||
| 10 | 1. Returns along the Z axis at a given feed rate to level R if it is lower than the original height along Z. | ||
| 11 | 1. Fast travel to return height in Z. |