Skip to Content
Last modified by writer on 2022/11/03 11:43
Show last authors
1 (% style="color:#a0be2d" %)//**G98**//(%%) – return to the position in which the axis was before a series of one or more canned cycles began.
2
3 (% style="color:#a0be2d" %)//**G99**//(%%) – return to the position defined by the canned cycle parameter R.
4
5 When the (% style="color:#a0be2d" %)//**G98**//(%%) command is issued, the canned cycle will use the Z position before the beginning of the canned cycle as the return level if this value is greater than the parameter R. Otherwise, the parameter R.
6
7 {{code language="g-code" title="(% style=~"color:#a0be2d~" %)//**G98**//(%%)// example~~://"}}
8 G0 X1 Y2 Z3
9 G90 G98 G81 X4 Y5 Z-0.6 R1.8 F10
10 {{/code}}
11
12 (% style="color:#a0be2d" %)//**G98**//(%%) mode is reset when exiting a canned cycle, explicit ([[(% style="color:#a0be2d" %)//**G80**//>>doc:Руководство пользователя.Описание G-кодов.Список G-кодов, поддерживаемых системой.G80-G89\: Постоянные циклы.G80: Отмена циклов сверления, растачивания, нарезания резьбы]](%%)) or implicit (any other move command). Switching between different canned cycles does not reset the (% style="color:#a0be2d" %)//**G98**//(%%) mode. In a series of canned cycles, you can switch between modes (% style="color:#a0be2d" %)//**G98**//(%%) and (% style="color:#a0be2d" %)//**G99**//(%%).