Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | The probing buttons in the interface of the milling module allow you to search the workpiece surface along the Z axis, as well as along the X and Y axes in the negative and positive directions. | ||
| 2 | |||
| 3 | [[Probing buttons>>image:2019-09-04 14_35_38-PUMOTIX x64 Administrator.png||alt="Probing buttons" data-xwiki-image-style-alignment="center"]] | ||
| 4 | |||
| 5 | When probing along the Z axis, the surface of the material will be searched, the Z coordinate will be zeroed and raised to a safe height. The Probing sensor signal must first be configured in the “Settings” → “IO” → “Input Signal Parameters” section. Also in the section “Settings” → “Tool” the probing speed and safe height are set. | ||
| 6 | |||
| 7 | When using probing buttons, the [[(% class="link" style="color:#8d69b2" %)**M115**>>doc:Руководство пользователя.Описание M-кодов.Стандартные M-коды модуля фрезеровки.WebHome]](%%) macro is called, which allows you to redefine the behavior of the system during probing. | ||
| 8 | |||
| 9 | Listing IDs of probing directions: | ||
| 10 | |||
| 11 | * X_Minus; | ||
| 12 | * X_Plus; | ||
| 13 | * Y_Minus; | ||
| 14 | * Y_Plus; | ||
| 15 | * Z_Minus. |