Wiki source code of Возможно ли в PUMOTIX подключить две оси на один пин Home?
Last modified by writer on 2023/09/06 14:34
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
4.1 | 1 | **Yes, it is possible.** |
| |
1.1 | 2 | |
| |
4.1 | 3 | Moreover, all Home sensors can be connected to one input. But in order for the PUMOTIX system to correctly handle such a connection, you need to change the homing strategy to a serial one axis. |
| |
1.1 | 4 | |
| |
4.1 | 5 | By default, in PUMOTIX, when you click the "Homing and Zero" button, the home is first searched for on the Z axis, and then simultaneously on all other axes. In addition, some additional modifications of the homing algorithm are available to users, according to which the homing works ((% style="color:#8d69b2" %)**M114**(%%)). You can select an executable modification from the [["Tool" settings tab>>doc:Руководство пользователя.Настройка ПО.Настройки инструмента.WebHome]]. |
| |
1.1 | 6 | |
| |
4.1 | 7 | [[Homing algorithm selection block in settings>>image:Homing_Parameters_en.png||alt="Homing Parameters" data-xwiki-image-style-alignment="center"]] |
| |
1.1 | 8 | |
| |
4.1 | 9 | The following modifications are provided to users: |
| |
1.1 | 10 | |
| |
4.1 | 11 | 1. //"Z-axis homing, then simultaneous homing of the axes"// — the Z axis will be homed first, then all other axes at the same time (this option is used by default); |
| 12 | 1. //"Sequential homing starting from the Z axis"// — sequentially in the following order: ZXYABCUVW; | ||
| 13 | 1. //"Simultaneous homing of all axes"// — all axes move to the home sensors simultaneously. |