Skip to Content
Last modified by writer on 2023/06/07 18:38
Show last authors
1 1. **Plug the wireless transmitter into the USB connector.**
2 Wait until the driver installation completes automatically.
3 1. **Run PUMOTIX.**
4 Open Plugins Configuration window via menu "Plugins" → “Plugins Configuration” and set the "Active" sign for plugin "CNC pendants".[[image:Pednant plugin On.png||data-xwiki-image-style-alignment="center" height="200" width="584"]](((
5 After that open the CNC pendants window for WHB04B-4(6) setup via "Plugins" menu.[[image:CNC pendant menu.png||data-xwiki-image-style-alignment="center" height="100" width="400"]]
6 )))
7 1. (((
8 (% class="auto-cursor-target" %)
9 **Setup the WHB04B-4(6) with PUMOTUX using the plugin.**
10 You must make a selection in the “Selected profile” field to configure the pendant. The list of profiles is loaded automatically depending on the selected module. PUMOTIX comes with default WHB04B-4(6) configurations but you can also create a custom configuration.
11 [[image:Empty Pendant plugin Window.png||data-xwiki-image-style-alignment="center" height="464" width="900"]]
12
13 **Options for modifying** the remote control will be displayed on the screen after profile selection. Select the modification according to your device.
14 [[image:WHB_modifications.png||data-xwiki-image-style-alignment="center" height="674" width="900"]]
15
16 {{success title="**Attention!**"}}
17 The remote control will not work correctly if you made a mistake when choosing a modification. If necessary press the button [[image:attach:Изменить модификацию.png]] in the upper right screen corner to change the modification.
18 {{/success}}
19
20 Next you will see on your screen the model of pendant and fields with commands for pendant buttons.
21 [[image:WHB_setup_window.png||data-xwiki-image-style-alignment="center" height="549" width="900"]]
22
23 You can reassign any pendant buttons or combination of buttons using the drop-down lists to assign commands.
24 [[image:WHB_parameter_drop_down_list.png||data-xwiki-image-style-alignment="center" height="336" width="400"]]
25
26 The window is equipped with connecting marks between the physical buttons on the pendant and the command selection field for your convenience (show the pic below).
27
28 [[image:WHB_buttons_marks.png||data-xwiki-image-style-alignment="center" height="549" width="900"]]
29 )))
30 1. **Setup the pendant and press the "Apply" button.**
31 Close the setting window - your gamepad is ready for use.