Skip to Content

3.0.1 en.html

Version 2.1 by abolgov on 2019/08/06 17:47
  1. Implemented possibility to create background macros executing in parallel with the main program.
  2. ChargePump output added.
  3. Add option to assign hotkey for function "Stop + close all valves" in oxy-fuel module. This function also can be assigned for remote control. There is no visible button for this function in GUI.
  4. Actually configured rotary axis (A, B or C) is displayed in "Milling (4 axes)", "Plasma cutting" and "Oxy-fuel cutting" modules. In the previous version A axis was displayed only. Rotary axes are not displayed on main tab if none of them are configured.
  5. Loaded G-code file name is displayed in window caption.
  6. Added message that Step/Dir outputs are not configured for the motor.
  7. Button "Reverse run" is displayed pressed during G-code reverse run.
  8. Windows "Rotate CS" and "Messages" are now correctly closed when Esc button pressed.
  9. Default step for FRO, RRO, SSO and JRO changing decreased to 5%.
  10. Tab "Process parameters" and window "Preset library" in Plasma cutting module were slightly refactored. Controls flickering effect was eliminated.
  11. Fix device network discovering issue when device connected after PUMOTIX start.
  12. Fixed TCP port from high range (>33000) specifying for Client connection in Server configuration.