Исходный код вики 3.0.1 en.html
Версия 2.1 от abolgov на 2019/08/06 17:47
Последние авторы
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% style="" %) | ||
| 2 | 1. Implemented possibility to create background macros executing in parallel with the main program. | ||
| 3 | 1. ChargePump output added. | ||
| 4 | 1. Add option to assign hotkey for function "Stop + close all valves" in oxy-fuel module. This function also can be assigned for remote control. There is no visible button for this function in GUI. | ||
| 5 | 1. Actually configured rotary axis (A, B or C) is displayed in "Milling (4 axes)", "Plasma cutting" and "Oxy-fuel cutting" modules. In the previous version A axis was displayed only. Rotary axes are not displayed on main tab if none of them are configured. | ||
| 6 | 1. Loaded G-code file name is displayed in window caption. | ||
| 7 | 1. Added message that Step/Dir outputs are not configured for the motor. | ||
| 8 | 1. Button "Reverse run" is displayed pressed during G-code reverse run. | ||
| 9 | 1. Windows "Rotate CS" and "Messages" are now correctly closed when Esc button pressed. | ||
| 10 | 1. Default step for FRO, RRO, SSO and JRO changing decreased to 5%. | ||
| 11 | 1. Tab "Process parameters" and window "Preset library" in Plasma cutting module were slightly refactored. Controls flickering effect was eliminated. | ||
| 12 | 1. Fix device network discovering issue when device connected after PUMOTIX start. | ||
| 13 | 1. Fixed TCP port from high range (>33000) specifying for Client connection in Server configuration. |