3.0.1 en.html

Версия 4.1 от nosolodkov на 2019/08/07 10:04

  1. Implemented possibility to create background operations executing in parallel with the main program.
  2. ChargePump output added.
  3. An option to assign hotkey for function "Stop + close all valves" in oxy-fuel module have been added. This function also can be assigned for remote control. There is no visible button for this function in GUI.
  4. Actually configured rotary axis (A, B or C) is displayed in "Milling (4 axes)", "Plasma cutting" and "Oxy-fuel cutting" modules. In the previous version A axis was displayed always. Rotary axes are not displayed on main tab if none of them are configured.
  5. Loaded G-code file name is displayed in window caption.
  6. A message that Step/Dir outputs are not configured for the motor have been added.
  7. A "Reverse run" button displayed pressed during G-code reverse run.
  8. "Rotate CS" and "Messages" windows are correctly closed when Esc button pressed.
  9. Default changing step for FRO, RRO, SSO and JRO decreased to 5%.
  10. "Process parameters" tab and "Preset library" window in Plasma cutting module were slightly refactored. Controls flickering effect was eliminated.