3.0.1 en.html

Version 9.1 by writer on 2022/06/10 15:10

  1. Implemented possibility to create background operations executing in parallel with the main program.
  2. ChargePump output added.
  3. Improved compatibility with Windows 10.
  4. An option to assign hotkey for function "Stop + close all valves" in oxy-fuel module have been added. This function also can be assigned for remote control. There is no visible button for this function in GUI.
  5. Actually configured rotary axis (A, B or C) is displayed in "Milling (4 axes)", "Plasma cutting" and "Oxy-fuel cutting" modules. In the previous version A axis was displayed always. Rotary axes are not displayed on main tab if none of them are configured.
  6. Loaded G-code file name is displayed in window caption.
  7. A message that Step/Dir outputs are not configured for the motor have been added.
  8. A "Reverse run" button displayed pressed during G-code reverse run.
  9. "Rotate CS" and "Messages" windows are correctly closed when Esc button pressed.
  10. Default changing step for FRO, RRO, SSO and JRO decreased to 5%.
  11. "Process parameters" tab and "Preset library" window in Plasma cutting module were slightly refactored. Controls flickering effect was eliminated.