3.4.2 en.html
Version 3.1 by abolgov on 2021/06/03 08:59
- The maximum number of motors that can be used for PLCM-E3 controller has been increased to 7.
- The Step/Dir spindle control mode has been implemented. Feature allows using a stepper motor or a servo motor as a spindle.
- Full-screen GUI mode implemented (menu "View — Full-screen mode" to enable).
- Added the ability to set the minimum and maximum PWM fill factors corresponding to the minimum and maximum revolutions in the analog (PWM) spindle control mode.
- Now you can not manually change the machine coordinate of the axis when the axis is referenced.
- Added the feature to automatically calculate the NC-program execution time on load.
- The License Manager updated. Info about PUMOTIX CAM features is now available there.
- The GUI is once again further optimized for 4K resolution.
- The PUMOTIX logo now displays information about the type of PUMOTIX build used (pre-release or release).
- Added dynamic change of measurement units (inches/mm) for all strings in the GUI.
- In the toolpath preview window, an indicator of the operation of the "Soft Limits" function has been added. A green glow indicates that the axis borders are working normally. Yellow glow — borders are enabled, but do not work (it is possible that homing was not performed).
- The user's access to the PUMOTIX settings can be restricted with a password.
- Added a discrete input signal "Spindle overload", which triggers an emergency stop.
- Additional diag info for PX1 motion controller added.
- Add displaying machine usage statistics (machine run, work time in different modes, pierces count in plasma and oxy-fuel modes and other parameters).
- Jogs are forbidden on X and Y axes when TorchDetachment input triggered.
- API for macros and background operations is extended.
- Minor fixes and improvements.