Исходный код вики 3.4.2 en.html
Версия 3.1 от abolgov на 2021/06/03 08:59
Последние авторы
| author | version | line-number | content |
|---|---|---|---|
| 1 | 1. The maximum number of motors that can be used for PLCM-E3 controller has been increased to 7. | ||
| 2 | 1. The Step/Dir spindle control mode has been implemented. Feature allows using a stepper motor or a servo motor as a spindle. | ||
| 3 | 1. Full-screen GUI mode implemented (menu "View — Full-screen mode" to enable). | ||
| 4 | 1. Added the ability to set the minimum and maximum PWM fill factors corresponding to the minimum and maximum revolutions in the analog (PWM) spindle control mode. | ||
| 5 | 1. Now you can not manually change the machine coordinate of the axis when the axis is referenced. | ||
| 6 | 1. Added the feature to automatically calculate the NC-program execution time on load. | ||
| 7 | 1. The License Manager updated. Info about PUMOTIX CAM features is now available there. | ||
| 8 | 1. The GUI is once again further optimized for 4K resolution. | ||
| 9 | 1. The PUMOTIX logo now displays information about the type of PUMOTIX build used (pre-release or release). | ||
| 10 | 1. Added dynamic change of measurement units (inches/mm) for all strings in the GUI. | ||
| 11 | 1. In the toolpath preview window, an indicator of the operation of the "Soft Limits" function has been added. A green glow indicates that the axis borders are working normally. Yellow glow — borders are enabled, but do not work (it is possible that homing was not performed). | ||
| 12 | 1. The user's access to the PUMOTIX settings can be restricted with a password. | ||
| 13 | 1. Added a discrete input signal "Spindle overload", which triggers an emergency stop. | ||
| 14 | 1. Additional diag info for PX1 motion controller added. | ||
| 15 | 1. Add displaying machine usage statistics (machine run, work time in different modes, pierces count in plasma and oxy-fuel modes and other parameters). | ||
| 16 | 1. Jogs are forbidden on X and Y axes when TorchDetachment input triggered. | ||
| 17 | 1. API for macros and background operations is extended. | ||
| 18 | 1. Minor fixes and improvements. | ||
| 19 | |||
| 20 | [[Full release notes ...>>doc:История обновлений]] |