Wiki source code of Газовая резка

Last modified by writer on 2022/11/03 14:15

version	line-number	content
5.1	1	===== bool Is_Oxy_Mode() =====
1.1	2
5.1	3	Checks if PUMOTIX is in gas cutting mode.
1.1	4
5.1	5	Return value:
1.1	6
5.1	7	* true – if PUMOTIX is in gas cutting mode;
	8	* false – if another mode is active.
1.1	9
5.1	10	===== number GetOxyCuttingFeed() =====
1.1	11
5.1	12	Getting the cutting feed speed specified in the gas cutting parameters.
1.1	13
5.1	14	Return value:
1.1	15
5.1	16	* cutting feed rate, mm/min.
1.1	17
5.1	18	===== number GetOxyProbeFeed() =====
1.1	19
5.1	20	Obtaining the material search speed specified in the gas cutting parameters.
1.1	21
5.1	22	Return value:
1.1	23
5.1	24	* material search speed, mm/min.
1.1	25
5.1	26	===== number GetOxyProbeRadius() =====
1.1	27
5.1	28	Getting the radius of the material search specified in the parameters of gas cutting.
1.1	29
5.1	30	Return value:
1.1	31
5.1	32	* material search radius, mm.
1.1	33
5.1	34	===== number GetOxySafeZ() =====
1.1	35
5.1	36	Getting the height of single crossings specified in the parameters of gas cutting.
1.1	37
5.1	38	Return value:
1.1	39
5.1	40	* height of single crossings, mm.
1.1	41
5.1	42	===== number GetOxyNozzleHeight() =====
1.1	43
5.1	44	Obtaining a correction for the nozzle height specified in the gas cutting parameters.
1.1	45
5.1	46	Return value:
1.1	47
5.1	48	* correction for nozzle height, mm.
1.1	49
5.1	50	===== number GetOxyCuttingHeight() =====
1.1	51
5.1	52	Obtaining the working cutting height specified in the gas cutting parameters.
1.1	53
5.1	54	Return value:
1.1	55
5.1	56	* working cutting height, mm.
1.1	57
5.1	58	===== void SetOxyTorchOn() =====
1.1	59
5.1	60	Turn on the cutting torch.
1.1	61
5.1	62	===== void SetOxyTorchOff() =====
1.1	63
5.1	64	Shutting off the cutting torch.
1.1	65
5.1	66	===== void SetOxyPreheatOn() =====
1.1	67
5.1	68	Turn on the heating torch.
1.1	69
5.1	70	===== void SetOxyPreheatOff() =====
1.1	71
5.1	72	Turn off the heating torch.
1.1	73
5.1	74	===== void SetOxyIgniterOn() =====
1.1	75
5.1	76	Turn on ignition (igniter).
1.1	77
5.1	78	===== void SetOxyIgniterOff() =====
1.1	79
5.1	80	Turn off the ignition (igniter).
1.1	81
5.1	82	===== bool OxyKeepPreheat() =====
1.1	83
5.1	84	Allows you to check whether the option is active in the gas cutting settings - do not turn off the heating torch after the cutting of the circuit ((% style="color:#8d69b2" %)M05(%%)).
1.1	85
5.1	86	Return value:
1.1	87
5.1	88	* true – if the option is active;
	89	* false – otherwise.
1.1	90
5.1	91	===== bool OxyAutoProbing() =====
1.1	92
5.1	93	Allows you to check whether the option is active in the gas cutting settings - search for material before ignition.
1.1	94
5.1	95	Return value:
1.1	96
5.1	97	* true – if the option is active;
	98	* false – otherwise.
1.1	99
5.1	100	===== bool IsOxyExternalZMode() =====
1.1	101
5.1	102	Allows you to check whether the external standalone axis Z mode is selected in the gas cutting settings.
1.1	103
5.1	104	Return value:
1.1	105
5.1	106	* true – if the autonomous Z axis mode is active;
	107	* false – otherwise.
1.1	108
5.1	109	===== bool IsOxyExternalZLimitHighConfigured() =====
1.1	110
5.1	111	Checks if the input of the LimitHigh signal broadcast by the autonomous axis unit is assigned.
1.1	112
5.1	113	Return value:
1.1	114
5.1	115	* true – if the input is assigned;
	116	* false – otherwise.
1.1	117
5.1	118	===== number GetOxyProbeStartHeight() =====
1.1	119
5.1	120	Getting the height of the beginning of probing specified in the parameters of gas cutting. A value of 0 means that rapid lowering to the height of the start of probing is disabled.
1.1	121
5.1	122	Return value:
1.1	123
5.1	124	* height of the beginning of probing, mm.

Wiki source code of Газовая резка

Page Tree