XHC WHB04B-4(6) Setup

Last modified by writer on 2024/05/14 12:53
  1. Plug the wireless transmitter into the USB connector.
    Wait until the driver installation completes automatically.
  2. Run PUMOTIX.
    Open Plugins Configuration window via menu "Plugins" → “Plugins Configuration” and set the "Active" sign for plugin "CNC pendants".Pednant plugin On.png

    After that open the CNC pendants window for WHB04B-4(6) setup via "Plugins" menu.CNC pendant menu.png

  3. Setup the WHB04B-4(6) with PUMOTUX using the plugin.
    You must make a selection in the “Selected profile” field to configure the pendant. The list of profiles is loaded automatically depending on the selected module. PUMOTIX comes with default WHB04B-4(6) configurations but you can also create a custom configuration.
    Empty Pendant plugin Window.png

    Options for modifying the remote control will be displayed on the screen after profile selection. Select the modification according to your device.
    WHB_modifications.png

    Attention!

    The remote control will not work correctly if you made a mistake when choosing a modification. If necessary press the button Изменить модификацию.png in the upper right screen corner to change the modification.

    Next you will see on your screen the model of pendant and fields with commands for pendant buttons.
    WHB_setup_window.png

    You can reassign any pendant buttons or combination of buttons using the drop-down lists to assign commands.
    WHB_parameter_drop_down_list.png

    The window is equipped with connecting marks between the physical buttons on the pendant and the command selection field for your convenience (show the pic below).

    WHB_buttons_marks.png

  4. Setup the pendant and press the "Apply" button.
    Close the setting window - your gamepad is ready for use.