PUMOTIX Postprocessors
Postprocessors for plasma and oxy-fuel cutting
SheetCam TNG
SheetCam postprocessor for plasma and oxy-fuel cutting. It can be used both with the active and inactive options "Ignore Z-movements and feeds from the control unit".
SheetCam postprocessor for plasma cutting of round pipes.
To set the pipe diameter in SheetCam, in the Operations window, select the menu item "Set Post Variable", in the window that opens, set Variable name: diameter, Value: for example, 108 mm. Click OK.
In the list of operations, setting the postprocessor variable should be before the plasma cutting operation.
Depending on the configuration of the machine, one of the XY scan axes “wraps around” the rotary axis and the corresponding symbol (A, B or C) is displayed for the given axis in the generated G-Code. This is customized by editing the first few lines of the post processor.
Постпроцессор SheetCam TNG для плагина Rotary Plasma. Данный плагин приобретается отдельно и позволяет производить резку труб прямоугольной и иной сложной формы. После установки плагина необходимо заменить файл rotaryhelper.lua, расположенный в каталоге:
C:\Program Files (x86)\SheetCam TNG\plugins\RotaryPlasma
Pronest
Pronest postprocessor for use with the active option "Ignore Z-movements and feeds from the G-Code".
Pronest postprocessor for use with the inactive option "Ignore Z-movements and feeds from the G-Code". In this case, the ignition height, cutting height and safe height are requested by the postprocessor when forming the G-Code.
PractiCAM
PractiCAM postprocessor for plasma cutting.
Postprocessors for milling
ArtCAM
Postprocessor for ArtCAM with tool change support.
DeskProto
Postprocessor for 3 axis milling.
FreeCAD
Postprocessor for 3 axis milling.
SolidCAM
SolidCAM postprocessor for milling three-axis machining.
POSTPROCESSORS ON REQUEST
ArtCAM
Postprocessor for 4 axis milling (axis XYZA – scan X).
Postprocessor for 4 axis milling (axis XYZA – scan Y).
Dolphin
Postprocessor for 3 axis milling.
Fusion360
Postprocessors for 3 axis milling.
Postprocessors for 3 axis plasma cutting.
InventorCam (developed by SolidCAM)
Postprocessors for 3 axis milling.
Postprocessors for 4 axis milling.
PowerMill
Postprocessors for 3 axis milling.
Postprocessors for 4 axis milling.
Postprocessors for 5 axis milling.
Powerstation
Postprocessor for 3 axis milling.
Rhinocam
Постпроцессор для 3-осевой фрезерной обработки.
SIEMENS NX / Solid Edge CAM Pro
Постпроцессор для 3-осевой фрезерной обработки.
SolidWorks (SolidCam)
Постпроцессор для 4-осевой фрезерной обработки.
Vectric Aspire
Постпроцессор для 3-осевой фрезерной обработки.
Постпроцессор для 4-осевой фрезерной обработки (оси XYZA – развертка X).
Постпроцессор для 4-осевой фрезерной обработки (оси XYZA – развертка Y).
Inventor HSM/HSMWorks
Постпроцессор для 3-х осевой фрезерной обработки.