Skip to Content
Last modified by writer on 2023/09/08 18:38
From version 3.1
edited by writer
on 2023/02/09 19:53
Change comment: There is no comment for this version
To version 2.1
edited by writer
on 2022/11/03 17:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -===== **number SpindleGetCurRPM()** =====
1 +==== **number SpindleGetCurRPM()** ====
2 2  
3 3  Getting the current spindle speed.
4 4  
... ... @@ -6,7 +6,7 @@
6 6  
7 7  * current spindle speed, rpm.
8 8  
9 -===== **number GetGCodeSpindleRPM()** =====
9 +==== **number GetGCodeSpindleRPM()** ====
10 10  
11 11  Getting the current spindle speed specified in the G-code.
12 12  
... ... @@ -14,7 +14,7 @@
14 14  
15 15  * current spindle speed specified in the G-code, rpm.
16 16  
17 -===== **number SpindleGetOverridePercent()** =====
17 +==== **number SpindleGetOverridePercent()** ====
18 18  
19 19  Obtaining a percentage of overriding the current spindle speed.
20 20  
... ... @@ -22,15 +22,15 @@
22 22  
23 23  * the percentage that the actual spindle speed is from the specified.
24 24  
25 -===== **void SpindleStartCW()** =====
25 +==== **void SpindleStartCW()** ====
26 26  
27 27  Turn on the spindle clockwise.
28 28  
29 -===== **void SpindleStartCCW()** =====
29 +==== **void SpindleStartCCW()** ====
30 30  
31 31  Turn on spindle rotation counterclockwise.
32 32  
33 -===== **void SpindleStartCWRPM(number rpm)** =====
33 +==== **void SpindleStartCWRPM(number rpm)** ====
34 34  
35 35  Turns on the spindle clockwise at the indicated rotation speed.
36 36  
... ... @@ -38,7 +38,7 @@
38 38  
39 39  * number rpm – desired spindle rotation speed.
40 40  
41 -===== **void SpindleStartCCWRPM(number rpm)** =====
41 +==== **void SpindleStartCCWRPM(number rpm)** ====
42 42  
43 43  Turns on the spindle counterclockwise at the indicated rotation speed.
44 44  
... ... @@ -46,11 +46,11 @@
46 46  
47 47  * number rpm – desired spindle rotation speed.
48 48  
49 -===== **void SpindleStop()** =====
49 +==== **void SpindleStop()** ====
50 50  
51 51  Stop spindle rotation.
52 52  
53 -===== **bool GetSpindleAutoStop()** =====
53 +==== **bool GetSpindleAutoStop()** ====
54 54  
55 55  Allows you to check if the option to automatically turn off the spindle when stopping the G-code execution is active.
56 56